The Narwal Freo X Ultra facilitates effortless floor maintenance. In addition to its capacity to do both mopping and vacuuming in a single operation, this device has the capability to retain trash in its dustbin for a duration of up to seven weeks. Furthermore, it is equipped with large water reservoirs to cleanse its mopping pads after each use. Nevertheless, the robot cannot be entirely disregarded, and there are a few basic cleaning measures you should do to ensure optimal performance of your Freo X Ultra.
This article provides an overview of the cleaning process for the Narwal Freo X Ultra, including the robot vacuum and its docking station. Additionally, it offers guidance on cleaning various components such as the dustbin, roller brushers, cleaning tray, and other related items.
How to clean the Freo X Ultra robot vacuum
Given that the Freo X Ultra docking station assumes responsibility for the majority of the cleaning tasks, the maintenance requirements for the robot vacuum are quite minimal. The Freo X Ultra eliminates the need of moop cleaning and frequent garbage emptying, allowing users to engage in hands-off operation for extended periods of time. Nevertheless, it does not imply that you may completely disregard it. This guide provides instructions on the process of cleaning the Freo X Ultra robot vacuum.
Step 1: it is recommended to regularly inspect the roller brush and side brush. Place the robot in a supine position, thereafter inspecting the brushes for any potential dirt, such as entangled hair or little items.
Step 2: Clean the sensors located on the outside of the robot in order to optimize its visual perception of the surrounding environment. The task may be accomplished by using a dry towel, while a moistened cloth may be used in cases where a stubborn stain is resistant to easy scrubbing.
Step 3: Proceed to remove the upper portion of the robotic vacuum and assess if the dustbin needs replacement or emptying. When using disposable dustbins, it is possible to go up to seven weeks without replacing them (however larger residences and those with extensive cleaning needs would need more frequent bag swapping). The use of the interchangeable dustbin necessitates a higher frequency of emptying.
Step 4: Verify whether the filter requires cleaning if you are using the changeable dustbin. To eliminate any loose dust, extract it from the dustbin and delicately strike it against the side of your waste can. Next, proceed to rinse it using clean water. After a 24-hour drying period, proceed to replace the filter in the garbage.
Step 5: involves inspecting the mopping pads to see whether they need replacement. The Narwal docking station is responsible for cleaning these items after each run. However, if you see that they have become too soiled to your satisfaction, it may be advisable to replace them with fresh ones.
How to clean the Freo X Ultra docking station
The Freo X Ultra docking station needs cleaning primarily two components, namely the water reservoirs and the cleaning tray. Here is the logic behind it.
Step 1: involves the removal of the robot vacuum from the dock, followed by the extraction of the cleaning tray from the lower section of the dock. Wash this item with water, pat it dry using a towel, and then reinstall it, making sure it securely fits.
Step 2: Unseal the upper part of the Narwal dock and extract the tanks containing clean water and unclean water. Drain both containers and wash them with pristine warm water. In order to address the issue of a contaminated reservoir, it may be advisable to use a cloth to effectively eliminate any accumulation of muck on its walls. Avoid use high-pressure water in conjunction with the reservoirs, as it may adversely affect the functionality of the floats responsible for monitoring water levels.
After the reservoirs have undergone the rinsing process, they should be reinserted into the dock.
