Summary
After the computer has been forced to shut down due to overheating, an error message that indicates a problem with the CPU fan is often shown.
Fix an Error with the CPU Fan
Despite the fact that it is annoying, the mistake is a sign that the protections on the machine are successfully functioning. For the sake of preventing it from occurring again and, more crucially, protecting your gear from being permanently damaged, this is what you should do.
How Do Errors in the CPU Fan Happen?
Incorrect settings or physical damage to the fan of the central processing unit (CPU) may both result in an error about the fan. There is also the possibility that dust might cause the computer to overheat, which would then force the fan to operate at rates that are much higher than normal, which would eventually lead to this error.
During the process of starting up, this mistake is often shown as one of the following messages displayed on a black screen:
- There is a problem with the CPU fan!
- Error with the CPU Fan!
- How to Fix an Error with the CPU Fan
In light of the fact that failures in the CPU fan may be caused by both hardware and software issues, the solutions that we have provided below are similarly diverse. If you follow these guidelines, you will be able to prevent the CPU from overheating and sending error messages.
Allow your machine to cool down. The simplest approach to doing this, depending on the condition that is causing it to overheat, is to just relocate it. The fact that it is left in a location that receives a great deal of sunshine or heat might lead it to overheat and shut down, regardless of how hard the fan is performing.
Turn off the overclocking. One of the consequences of overclocking is a significant rise in the temperature of the system, which the basic fans are unable to handle. Overheating may cause circuits to become damaged, as well as create repeated shutdowns and faults related to overheating.
Clean the fans on the central processing unit. In order to proceed with this step, you will need to switch off your computer, remove it from the power supply, and start by opening the case. After that, you may use an air cannon or bottled air to clean the inside and remove any dust that may be present.
Take care not to spray any cleaning chemicals onto any of the components, since doing so might cause significant harm to a number of different components.
Numerous electronic gadgets, like the Microsoft Surface range of products, are not intended to be opened, and if you do so, you run the risk of voiding the warranty or causing damage that is irreversible. Consider consulting the official help manual for your device or getting in touch with customer assistance if you are uncertain.
Ensure that the fan is firmly fastened in its position. While your computer is open, be sure to inspect the fan to ensure that it has not become loose or moved out of its proper position. Either a screwdriver or adhesive should be able to secure the fan back into its original position; however, this may vary depending on the model.
When you are inspecting anything that is contained inside electrical equipment, you must ensure that it is totally switched off and isolated from any and all sources of electricity. Remember to turn it off completely, rather than simply putting it to sleep.
Determine the placement of the fan. In the event that you have installed the CPU fan on your own, check to see that it is located in the appropriate location. It was your responsibility to connect it to the CPU header that was located on the motherboard. It is possible that the fan will operate when the computer is turned on if it is linked to another device; however, it will not be able to adequately cool the central processing unit (CPU), which is the major function of the fan.
Although it is quite probable that the CPU header will be labeled “CPU Fan,” even if it is not, it is still simple to identify due to the fact that it has three holes for the fan’s three-pronged connector.
Experiment with a different CPU fan header. If your motherboard has more than one header for the CPU fan, you should connect the fan to a separate place on the motherboard. It is possible that this will repair the fault with the CPU fan.
Boot into the BIOS and check the settings for the fan here. Make sure that the active heat sink and fan duct with fan are turned on and that the passive heat sink and fan duct without fan are turned off, respectively. These choices are often located in this section: The CPU fan may be seen under Advanced Settings > Hardware Monitor.
At the time that you get the first CPU fault warning, you will often be instructed to hit the F1 key. During the time that this message is shown, pressing F1 will also access the BIOS.
The fan speed monitor should be turned off in the BIOS. The CPU fan error warning may be bypassed, and your device can be brought back online if you are able to see that your CPU fan is functioning properly and if you are certain that your computer is not overheating or operating at an excessively high temperature.
By opening the BIOS, you may do this by selecting Monitor > Fan Speed Monitor > N/A > Ignore. After that, save the file and leave the BIOS.
The capacity of your computer to detect CPU fans may be negatively impacted by this option, which may bring about issues with overheating in the future. We will only propose it to you if you are certain that the fan on your central processing unit is functioning properly and if you are able to check the temperature of your laptop.
Replace the fan on the central processing unit. It’s possible that your fan is broken and has to be replaced if none of the preceding solutions work.
Repairing the fan can be covered under the warranty that comes with your computer. Depending on whether or not you bought the fan separately, it may come with a separate warranty that you may utilize to get a new component at no cost or at a reduced price.
What can I do to repair a computer fan that is making a lot of noise?
In order to repair a computer fan that is making a lot of noise, you should begin by cleaning the fans, then check the Task Manager for apps that use a lot of CPU, and lastly, take measures to prevent your computer from being too hot.
How can I regulate the speed of the fan on my PC?
The software that comes with your computer, or the BIOS of your computer, may be used to change the speed of your CPU fan. Never adjust the fan speed to ‘0’ since doing so might potentially cause your central processing unit to overheat.
Why am I getting an error message about the CPU fan while it is still spinning?
If the fan is operating normally but you are still receiving an error, there may be a problem with the fan itself, or your computer may not have notified you that the fault has been resolved.
