Summary
issue if one of your AirPods stops .. If you have ever been in a circumstance where one of your AirPods unexpectedly stopped functioning, how did you handle the problem? It may be very aggravating, especially if you were in the midst of listening to your favorite music or podcast, or if you were trying to catch up on a call.
resolve the issue if one of your AirPods stops functioning
In the event that one of your AirPods malfunctions, you will be deprived of half of the experience. Nevertheless, there are a few things that you may attempt in order to solve the problem and get your AirPods on the internet again. It is not necessary to have the second-generation AirPods Pro, the third-generation AirPods, or any of the earlier models in order to implement these solutions.
If one of your AirPods isn’t functioning properly, what can you do to repair it?
In the event that one of your most cherished wireless earbuds is not functioning properly, there are a number of troubleshooting measures that you may try before you ever consider going to an Apple Store. These actions might very well resolve the problem. In this article, we will walk you through some of the most valuable options that are currently available.
First, check to see whether your AirPods have been charged. Make certain that they have a sufficient amount of charge. There is a possibility that one of the AirPods will have a higher battery level than the other. Replace both AirPods in the charging case that they came in. Make sure that the case is also charged with anything. After waiting a few minutes, check to see whether both AirPods are operating as they should under the circumstances.
Cleaning your AirPods is the second step. Over time, your AirPods may accumulate earwax, dust, and other debris, which might hinder your ability to hear. You should clean your AirPods using a cloth that is lint-free, dry, and gentle. A dry cotton swab should be used to cleanse the speaker meshes and microphone in a gentle manner. Keep in mind that you should avoid pushing trash farther inside the AirPod. It is also important to check that the charging connections in the casing are not obstructed by any dirt. You may also check out our more in-depth explanation of how to clean your AirPods, which is presented below for your convenience.
The third step is to check the stereo balance. There are occasions when the problem might be caused by the parameters of the stereo balance on your device. In the event that the balance is adjusted to the left or right, it may seem as if one of the AirPods is malfunctioning.
You may access the Accessibility option by going to the Settings app on your smartphone. When you reach the Audio/Visual section, scroll down and check that the Balance slider is centered. Make adjustments as required.
The fourth step is to reconnect your AirPods. Additionally, you may try disconnecting and reconnecting your AirPods. In order to alleviate problems with connection, this is one of the options that may be used.
You may do this by opening the Settings app on your smartphone and selecting the Bluetooth option. Once you have located your AirPods on the list, choose the “i” symbol that is located next to them. After that, scroll down until you reach the Forget This Device option, and then confirm it. There is no longer a connection between your AirPods and your smartphone.
When you are ready to reconnect, place the AirPods back into their case and then open the top. Please ensure that the setup button located on the back of the casing is pressed and held until the status light flashes white. In order to reconnect your AirPods, you must first get them near your smartphone and then follow the instructions that appear on the screen.
The fifth step is to ensure that your devices are always up-to-date. This is necessary in order to guarantee that your software is compatible with your devices and to fix any defects that may be present.
In order to determine whether or not there is a software update available, you must first launch the Settings app on your Apple iPhone and then pick the General option. Following that, choose the Software Update option. Tap Update Now if there is an update that needs to be installed.
It is necessary to ensure that your AirPods are linked to your Apple smartphone and that your device is also updated in order to update them. Automatic updates are available for AirPods, but in order to get them, your AirPods must be linked to your smartphone.
In the sixth step, reset your AirPods. Resetting your AirPods is an option to consider if none of the alternatives presented above are successful. They will be returned to their factory settings as a result of this.
Put the two AirPods into their respective charging cases. The lid should be opened, and then the setup button located on the back of the case should be pressed and held for about fifteen seconds until the status light flashes amber and then white. Make sure that your AirPods are properly connected to your smartphone.
It is expected that the problem you are experiencing with one of your AirPod earphones will be resolved by following these procedures. If this is not the case, you should seek help from Apple’s customer care team.
How to fix one AirPod that isn’t working
1. Place both AirPods back into their respective cases and check to see that they are charging. Charge them for a period of thirty seconds.
2. Remove the lid of the case from the area where your iPhone or iPad is located, and then wait for the AirPods to appear on the screen.
3. To ensure that the audio is functioning properly, listen to music or watch a video while wearing both AirPods in your ears.
A guide to resetting your AirPods
1. Before you begin, check that your AirPods are securely secured within their charging case and that the cover is closed.
2. After thirty seconds, if you want to connect your AirPods to your iPhone or iPad, you will need to open the lid. To enable Bluetooth on your mobile device, initiate the Settings menu and choose Bluetooth.
3. In the list of Bluetooth devices, locate your AirPods and then hit the i symbol that is located next to them.
4. Set the device to “Forget this device.” To locate this option, you may need to scroll down a little bit.
5. When you realize that you have forgotten your AirPods, open the lid of the charging case and press and hold the button on the rear for around fifteen seconds. It is expected that the light on the front would flash white.
6. At this point, place your AirPods in their charging case as close as possible to your iPhone or iPad while keeping the lid open. The instructions for pairing them should appear on the screen, exactly as they did the first time you set them up.
In most cases, this issue may be resolved by resetting your AirPods. On the other hand, if you are still having problems with either one or both of your AirPods, you should check to see if there is any debris that is blocking the speaker mesh. To learn how to properly clean your AirPods and their case, check out our guide on cleaning your AirPods. It will provide you with advice on how to do so.
